Rotring Isograph Technical Pens are high precision with a refillable ink reservoir. Wear-resistant, hard chrome-plated thin tip allows working in exquisite detail.
- Professional Quality Tubular Nib Technical Pens
- Refillable Ink Reservoir
- For Use on Tracing Paper
- Available in 0.18, 0.25, 0.35, 0.5 and 0.7mm Nib Sizes
For Isograph Nibs click here
For Isograph Ink click here
For Pen Cleaner Fluid click here
Rotring Isograph Pens conform to ISO standards of line width and are compatible with lettering stencils that conform to this same standard.
Isograph pens feature a refillable reservoir and will perform only with compatible inks such as Rotring 591017 or Mars M2.
As with all technical pens they were designed to perform a highly specialised function and an understanding of this is useful should you wish to use one for another style of drawing. Full details follow.
Then: Rotring Isograph Technical Pens are a development that met the industry requirements of the time. These requirements, in brief, were to produce drawings in standardised line widths and lettering heights that were in the most opaque black lines possible on translucent papers such as trace and film.
This all related to the available technology of reproducing copies of the drawings using the Diazo method. Briefly this method used ultraviolet light to expose a sensitised paper that was laid underneath the drawing. This exposure removed the sensitised coating except where the ink lines on the drawing “shadowed” it. The paper was then separated from the drawing and “developed” by exposure to ammonia fumes – all this taking place in a plan printing machine.
The blacker and more opaque the lines the quicker you could print your drawing and often very large quantities were required so it was essential to maximise the efficiency of the process.
Now: The technical pen remains the means for laying down the blackest fine line possible and this has many applications outside the original intention of the design. While many are still in use for traditional manual drafting there is a following amongst designers and sketchers who appreciate the precision of this vey specialised pen.
It should be understood that the Isograph Pen, as with all technical pens, was only designed for use on tracing paper and film. Other types of media do not necessarily have a surface suitable for the fine tip of these pens and if fibres of such media get picked up by the pen point they will inevitably clog it up.
To achieve the opacity demanded the inks are made from a formulation of glue, soot and shellac. These are suspension type inks where particles of the black pigment (soot) is suspended in liquid.
This requires diligent care of the pen so as to avoid clogging. Regular cleaning of the helix to maintain air intake it is wise and keeping the ink reservoir close to full helps prevent flooding.
Of all operating tips the best is as follows. Always cap the pen immediately you stop drawing with it. If not capped the ink will quickly dry in the tip of the pen. If you cap it after this ink has been allowed to dry this dried contaminant can be pushed up in to the point making starting the pen next time difficult. If it becomes firmly blocked then shaking the pen to get the ink flowing can actually damage the internals of the nib. Always cap the pen when it is still working – draw a quick line – then screw the cap on firmly. This will greatly improve the odds of it starting again next time you go to use it.